🏠 Homeℹ️ About UsπŸ—οΈ All Servicesβ€’ Kitchen & Bathβ€’ Hardwood Flooringβ€’ Tile Installationβ€’ Vinyl & Luxury Plankβ€’ Epoxy CoatingsπŸ–ΌοΈ Gallery⭐ ReviewsπŸ“ BlogπŸ“ Areas Served❓ FAQπŸ“ž ContactπŸ“‹ Get Free Estimate

How Much Does LVP Flooring Cost to Install?

Wondering what LVP flooring costs to install? Get real pricing breakdown, what affects the quote, and tips to budget smart for your project.

Most homeowners pay between $3 and $7 per square foot for LVP flooring installation, not counting the material itself. Add in the cost of the planks β€” typically $2 to $5 per square foot depending on thickness and quality β€” and a 500-square-foot room can run anywhere from $2,500 to $6,000 fully installed. That's a wide range, and the reason it varies so much comes down to a handful of factors that are worth understanding before you start getting quotes.

What Drives the Cost of LVP Installation

The condition of your existing subfloor is one of the biggest variables. LVP is fairly forgiving, but it still needs a flat, clean surface β€” ideally within 3/16 of an inch over a 10-foot span. If we find soft spots, squeaky areas, or high/low points when we pull up your old flooring, that subfloor prep adds time and materials to the job. It's not a surprise we spring on you at the end; it's something a good installer will flag during the estimate.

Layout complexity matters too. A straightforward rectangular room is faster to install than an open floor plan with multiple angles, doorways, closets, and transitions. Diagonal or herringbone patterns, while striking, take more time and generate more waste β€” typically factor in an extra 10–15% on material.

Other cost factors include:

  • Removal and disposal of old flooring β€” demo adds labor and a haul-away fee
  • Stair installation β€” each step requires individual cuts and nosing pieces, which is more labor-intensive than flat floor runs
  • Underlayment β€” some LVP comes with it pre-attached; if yours doesn't, budget for a separate underlayment layer
  • Transitions and trim β€” thresholds, reducers, and quarter-round molding are often quoted separately

LVP Thickness and Quality: Don't Skip This Part

Not all LVP is the same. Thicker planks β€” 6mm and above, with a wear layer of at least 12 mil β€” hold up significantly better in high-traffic areas and feel more solid underfoot. In Atlanta's climate, where humidity swings between seasons, a quality LVP with good dimensional stability is worth the extra few dollars per square foot. Cheaper options can gap or buckle if the product isn't rated for temperature and moisture fluctuation. We always walk customers through a few tiers of product so they can make a decision that fits both their budget and their lifestyle.

Getting an Accurate Quote

Square footage is just the starting point. When our team comes out to measure, we're also looking at the subfloor, the number of rooms and transitions, what's coming up beforehand, and any tricky areas like stairs or wet spaces. A quote that accounts for all of that upfront is far more reliable than a low-ball number that grows once the job starts.

A few things you can do before calling:

  • Measure your rooms and add them up (don't forget closets)
  • Know what's currently on your floors and whether you want it removed
  • Have a rough sense of the LVP style β€” thickness, color, wood-look vs. stone-look
  • Note any areas with existing moisture issues

Is LVP Worth It Compared to Other Flooring?

For most rooms in most homes, yes β€” especially if you have kids, pets, or just want something that looks great without requiring a lot of maintenance. LVP installs faster than hardwood, costs less than tile in most cases, and holds up to moisture better than laminate. It's not the right choice for every situation, but it's genuinely one of the most practical flooring options available right now, and the quality at mid-range price points has improved dramatically over the past few years.

If you're ready to get a real number for your specific home, reach out to Jake of All Trades at (470) 202-5155 β€” we're happy to walk through the project with you and give you an honest, detailed quote with no surprises.

← Back to Blog | Get a Free Quote β†’

Ready to Get Started in Atlanta?

Call Jake of All Trades for a free quote. We serve Atlanta and surrounding areas.

Get Free Quote πŸ“ž (470) 202-5155